|
|
|
|
|||
|
|
|
|
Solid-CIM 3D Toolbar Icon: 
Solid-CIM 3D Ribbon Icon: 
Allows you to add more parts to Solid-CIM 3D after an assembly has already been recognized. You will be prompted to select all the solids and then Solid-CIM 3D will add the new parts to the output that is exported or reported in the cut list. This command can only run after the solid has been selected previously with Select Solid. This command will still follow the parameters in Solid-CIM 3D settings (SCIMSet).
Note: If adding parts, it needs to be done in the assembly view. If you have laid the parts flat using the Solid-CIM 3D 'Lay Flat' command, you will not be able to add additional parts to the assembly.
