AutoNest Manual

For information on how to set up basic 'Nesting' and 'Advanced Nesting' in Router-CIM Automation Suite, refer to the appropriate section in the manual.

AutoNEST is addressed to the common problem faced in a number of industries where repetitive or non-repetitive parts have to be cut economically from given stock sheets. This optimization requirement is often encountered in industries such as shipbuilding, aerospace, sheet metal, garment manufacture, furniture work, etc.

While each different industry may have its own characteristics, the underlying objective of the manufacturer is to maximize utilization and minimize material wastage through judicious layout of parts.

A part’s geometry is input in a simple TEXT .VEC file format or in the AutoCAD DXF format.

Through a Task editor (TaskEdit command), you can define your nesting requirements, i.e.: stock sizes, quantity of each stock size, parts to be nested , quantity and grain orientation of each part, cutting gap and so on. Taking into consideration these parameters, AutoNEST will search through the numerous possible arrangements and present near-optimum layout solutions.

AutoNEST assists the fabricator in maximizing material utilization and reduce drastically the time taken to plan a layout.

The program has been highly optimized to provide the shortest run time, a fraction of the time of what it would have taken manually.

AutoNEST features a single intelligent nesting engine - NestPRO to handle all your nesting jobs.

AutoNEST allows the incorporation of an "intuition" factor from the experienced designer so as to take into consideration the practical features only known by the designer. Nested layouts can readily be edited through AutoCAD or any CAD system for the best final layouts.

From Version 9.5.1 onwards, AutoNEST has incorporated an additional functionality called Auto-Bridge into the software.

This publication or any parts thereof, may not be reproduced by any method, for any purpose, without prior written consent of RADAN SYSTEMS PTE LTD. For conditions and permission to reproduce this material in other languages other than English language, please contact RADAN SYSTEMS PTE LTD.

Warranty, Liability and Disclaimer

RADAN SYSTEMS PTE LTD makes no warranty, either expressed or implied; including, but not limited to any implied warranties of merchantability or fitness for a particular purpose, regarding these materials. In no event shall Radan Systems Pte. Ltd be liable to anyone for special, collateral, incidental or consequential damages in connection with or arising out of purchase or use of these materials. The sole and exclusive liability to RADAN SYSTEMS PTE LTD, regardless of the form of action, shall not exceed the purchase price of the materials described herein.

RADAN SYSTEMS PTE LTD reserves the right to revise and improve its products as it sees fit. This manual describes the state of this product at the time of publication, and may not reflect the product at all times in the future.

Trademarks

AutoNEST is a registered trademark of Radan Systems Pte Ltd.

NESTPRO is a registered trademark of Radan Systems Pte Ltd.

AutoCAD is a registered trademark of Autodesk Inc.

Windows XP /Windows Vista /Windows 7 /Windows 8/ Windows 10; Windows 2000 Server / Windows 2003 Server /Windows 2008 Server and Windows 2012 Server are the registered trademarks of Microsoft Inc.

In no circumstances may any of the trademark or copyright notices or proprietary legends contained on or within the software or documentation or on their packages be removed.