TASKNAME_JOB.XML

<!-- AutoNEST V9 ENGLISH -->

<?xml version="1.0" encoding="gb2312" standalone="yes"?>

<!-- Job Name = "BIGPART-2"-->

<!-- Line1: No of Distinct Shapes -->

<!-- Line2: No of Distinct R-Stock & I-Stock & Multi-Stock Control-->

<!-- Line3: Cutting Gap -->

<!-- Line4: Shear Blade Limit -->

<!-- Line5: Left , Right , Bottom and Top side Edge Allowance of the Regular Stock -->

<!-- Line6: Nesting Control Parameters -->

<Job_Contents>

<Distinct_Part_Num> "4" </Distinct_Part_Num>

<Stock Distinct_Rstock_Num = "1" Distinct_Irstock_Num = "0" Multi_Stock_Control = "0"/>

<Cutting_Gap> "15.0000"</Cutting_Gap>

<Shear_Blade_Limit> "0.0000"</Shear_Blade_Limit>

<Edge_Allowance Left = "15.0000" Right = "15.0000" Bottom = "15.0000" Top = "15.0000" Ir_Stock_Edge_Allowance = "0.0000"/>

<Nesting_Controls Nest1_Type = "D" Stock_Priority = "R" Start_Point = "1" Packing_Dir = "3" Com_Line = "0" Nest1_Mirror = "0" Ignore_Hole = "1" Save_Remnant = "0" Rem_X_Dim = "0.0000" Rem_Y_Dim = "0.0000" Max_Stock_Priority = "0" Min_Nest_Space = "0.0000"/>

<Stock Size = "3048.0000 x 9144.0000" Qty = "5" Priority = "1" Cost = "0.00" />

<Part Basic_Qty = "1" Name = "BW1" Orientation = "(ALL)" Pairing = "Y" Priority = "1" Block_Name = "BW1" Filler_Qty = "0" Support_180 = "1" Step_Angle = "5" />

<Part Basic_Qty = "1" Name = "BW5" Orientation = "(ALL)" Pairing = "Y" Priority = "1" Block_Name = "BW5" Filler_Qty = "0" Support_180 = "1" Step_Angle = "5" />

<Part Basic_Qty = "1" Name = "BW7" Orientation = "(ALL)" Pairing = "Y" Priority = "1" Block_Name = "BW7" Filler_Qty = "0" Support_180 = "1" Step_Angle = "5" />

<Part Basic_Qty = "1" Name = "BW8" Orientation = "(ALL)" Pairing = "Y" Priority = "1" Block_Name = "BW8" Filler_Qty = "0" Support_180 = "1" Step_Angle = "5" />

<Bridge Values = "BRIDGE " Bridge_Width = "20.0000" Corner_Offset = "70.0000" Min_Angle = "50.0000" Max_Bridges_Per_Part = "4"/>

</Job_Contents>

TASKNAME_SUM.XML

<!-- AutoNEST V9 ENGLISH -->

<?xml version="1.0" encoding="gb2312" standalone="yes"?>

<Nesting_Summary_Report Task_Name = "BIGPART-2">

<Nesting_Report>

<Stock ID = "#1" Nested_Qty = "1" Size = "3048.00x9144.00" Area=" 27870912.00" EnclRect_Size="2600.00x8900.61" EnclRect_Area="23141586.00" EnclRect_O_Stock_Area="83.03%" >

<Part Name = "BW1" Nested_Qty = "1" Basic_Qty = "1"/>

<Part Name = "BW5" Nested_Qty = "0" Basic_Qty = "1"/>

<Part Name = "BW7" Nested_Qty = "0" Basic_Qty = "1"/>

<Part Name = "BW8" Nested_Qty = "1" Basic_Qty = "1"/>

<Total_Part_Area>"15574933.06"</Total_Part_Area><Part_Area_O_EnclRect>"67.30%"</Part_Area_O_EnclRect>

<Part_Area_O_Stock>"55.88%"

</Part_Area_O_Stock><Total_Part_Perimeter>"28374.83"</Total_Part_Perimeter><Sub_Total>"2/4"</Sub_Total>

</Stock>

<Stock ID = "#2" Nested_Qty = "1" Size = "3048.00x9144.00" Area=" 27870912.00" EnclRect_Size="3018.00x4153.21" EnclRect_Area="12534387.78" EnclRect_O_Stock_Area="44.97%" >

<Part Name = "BW1" Nested_Qty = "0" Basic_Qty = "1"/>

<Part Name = "BW5" Nested_Qty = "1" Basic_Qty = "1"/>

<Part Name = "BW7" Nested_Qty = "1" Basic_Qty = "1"/>

<Part Name = "BW8" Nested_Qty = "0" Basic_Qty = "1"/>

<Total_Part_Area>"8230940.33"</Total_Part_Area><Part_Area_O_EnclRect>"65.67%"</Part_Area_O_EnclRect>

<Part_Area_O_Stock>"29.53%"

</Part_Area_O_Stock><Total_Part_Perimeter>"22010.78"</Total_Part_Perimeter><Sub_Total>"2/4"</Sub_Total>

</Stock>

</Nesting_Report>

<Nesting_Summary>

<Parts>

<Part Name = "BW1" Basic_Qty = "1" Nested_Basic_Qty = "1" Filler_Qty = "0" Nested_Filler_Qty= "0" Area = "11458847.66"/>

<Part Name = "BW5" Basic_Qty = "1" Nested_Basic_Qty = "1" Filler_Qty = "0" Nested_Filler_Qty= "0" Area = "4117914.30"/>

<Part Name = "BW7" Basic_Qty = "1" Nested_Basic_Qty = "1" Filler_Qty = "0" Nested_Filler_Qty= "0" Area = "4113026.03"/>

<Part Name = "BW8" Basic_Qty = "1" Nested_Basic_Qty = "1" Filler_Qty = "0" Nested_Filler_Qty= "0" Area = "4116085.41"/>

<Total_Nested_Basic_Qty>"4/4"</Total_Nested_Basic_Qty>

</Parts>

<Stocks>

<Stock Size="3048.00x9144.00" Reg_Stock_Used="2" Used_Stock_Cost ="0.00"/>

<Total Total_Num = "2" Total_Cost = "0.00" />

</Stocks>

</Nesting_Summary>

</Nesting_Reporty_And_Nesting_Summary>

TASKNAME_SYM.XML

<!-- AutoNEST V9 ENGLISH -->

<?xml version="1.0" encoding="gb2312" standalone="yes"?>

<!-- Process Time Taken -->

<!-- Input : 0 min 0.01 sec-->

<!-- Pair I : 0 min 0.89 sec-->

<!-- Pair II : 0 min 0.04 sec-->

<!-- Packing : 0 min 0.26 sec-->

<!-- Total : 0 min 1.21 sec-->

<Sym_File_Contents>

<Sym_File_Name>"BIGPART-2"</Sym_File_Name>

<Distinct_Part_Num>"4"</Distinct_Part_Num>

<Total_Parts_Nested>"4"</Total_Parts_Nested>

<Stock Total_Reg_Stock_Used = "2" Total_Irreg_Stock_Used = "0" />

<Stock ID = "#1" Nested_Qty = "1" Size = "3048.00x9144.00" EnclRect_LB_Pt = "(15.000000 15.000000)" EnclRect_Length = "8900.606602" EnclRect_Width = "2600.000000">

<Total_Part_Area>"15574933.063671"</Total_Part_Area>

<Part Name = "BW1" X_Coord = "793.405704" Y_Coord = "1523.716973" Angle = "0.000000" Display_Color = "2" Hole_No = "0" Layer = "1" />

<Part Name = "BW8" X_Coord = "6893.683538" Y_Coord = "607.457250" Angle = "0.000000" Display_Color = "5" Hole_No = "0" Layer = "1" />

</Stock>

<Stock ID = "#2" Nested_Qty = "1" Size = "3048.00x9144.00" EnclRect_LB_Pt = "(15.000000 15.000000)" EnclRect_Length = "4153.210469" EnclRect_Width = "3018.000000">

<Total_Part_Area>"8230940.327984"</Total_Part_Area>

<Part Name = "BW5" X_Coord = "2011.738470" Y_Coord = "2510.045662" Angle = "0.000000" Display_Color = "3" Hole_No = "0" Layer = "1" />

<Part Name = "BW7" X_Coord = "2072.339690" Y_Coord = "537.954338" Angle = "180.000000" Display_Color = "4" Hole_No = "0" Layer = "1" />

</Stock>

</Sym_File_Contents>