|
|
|
|
|||
|
|
|
|
The Typical M-Codes for the inkjet marking head are as follows:
M15 -- Rotate Head to print in X positive moves.
M14 -- Rotate to print in Y positive moves.
M16 -- Lower Inkjet Head
M17 -- Inkjet Print Signal
Solution machines are slightly different:
M13 -- Rotate Head to 90°
M14 -- Rotate to 0°
M16 -- Lower Inkjet Head
M17 -- Inkjet Print Signal
* If either X or Y is printing backwards, print head is installed either 90° or 180° from necessary position. Due to the fact that print heads cannot be tested during assembly, this is a required step for the installer.
