|
|
|
|
|||
|
|
|
|
*brng*
Largest gap in data for BLEND if NCJOIN is "T" to close
*cstrang*
Start angle (expressed in degrees) for circular shapes. 0 starts at 3 o'clock.
*cutfil*
Offset fillet radius for rounded corner filleting in CUT.
*endmrgn*
End margin on slicer for 3D surface machining
*leadfed*
This is the percentage of the programmed feedrate that the lead in will be performed at.
*leadratio*
A value used in an equation to determine the angle of entry for Heli-lead cycles.
*ncjoin*
Use polyline join with *brng* tolerances to close gaps in geometry commonly caused by DXF or IGES transfers.
*offvect*
NOT USER CONFIGURABLE
*pat_fuzz*
Value for pattern recognition tolerance amount
*r4x_corner_incr*
This variable controls the Router-CIM 4th axis interpolation cycle. This value controls how long the segments should be when interpolating around an inside corner.
*r4x_corner_offset*
This variable controls the Router-CIM 4th axis interpolation cycle. This is the distance from the inside corner the inside corner cuts will start.
*reduceopt*
To reduce surface machining tool path to arcs the response is "r" and "s" for no reduction to arcs.
*reducezero*
Data reduction tolerance of slicer for producing arcs in 3 axis machining.
